Chris-Marine
Liner Diameter Measurement / LDM
Instrument used to take liner diameter measurements without removing the cylinder head or valve housing.
- For 2-stroke liners 500–980 mm bore
- Accurate measurement of cylinder wear and clover leafing without removing the cylinder cover
- Ideal when preparing for docking, for condition-based liner maintenance or in continual liner wear monitoring
- Up to 26 measurement levels; about 1 hour per liner at 4 diameters / 10 levels
- Measures wear and clover-leafing at 60 radii
- One rugged case, approved as checked baggage under IATA regulations
- User-friendly hand-held tablet with remote technical support and software upgrades
Liner Diameter Measuring Tool
Liner diameter measurement in a fraction of the time required with traditional methods.
With traditional methods, it will take a three-man team a full day to get liner diameter measurement from two cylinder liners. However, with the Chris-Marine Liner Diameter Measuring tool (LDM), this task can be completed in just three hours by a single operator. The LDM offers a fast, accurate, and reliable way to measure cylinder wear and deformation, improving efficiency and reducing downtime.
Book a training! Book a service!
User-friendly Liner Diameter Measuring
Abnormal wear and deformation resulting from slow-steaming, new lube oils, or changed route are conveniently picked up by the LDM, thereby allowing for prompt countermeasures. The latest LDM-generation offers 13 hours of continuous user-time without intermediate recharging, which makes it even more user-friendly than before. Like previous versions, it can measure all 2-stroke engines with a bore from 500 to 980 mm, without removing the cylinder cover or exhaust valve housing.
The clover-leafing measurement feature allows the user to detect non-oval wear and deformation like:
- heat load deformation, due to slow-steaming retrofitting
- injector erosion
- lube oil distribution related wear
The LDM is available for Everllence (MAN B&W), Wartsila and Mitsubishi 2-stroke engines with a cylinder bore of 500 to 980 mm.
Want to learn how to use the LDM?
Video: How to use the Liner Diameter Measuring Instrument
Chris-Marine’s monitoring portfolio includes instruments to:
- measure surface roughness, liner diameter and coating thickness
- take pictures of the liner to visualize potential wear and damage
- analyze shaft power efficiency
- measure cylinder pressure
Learn more about Cylinder Condition Monitoring & Reconditioning
Technical Specifications
| Specification | Feature |
|---|---|
| Weight | Measuring unit: 3.6 kg, Additional equipment: 8 kg |
| Diameter measuring range | 2-stroke engines 500 – 980 mm liner diameters |
| Height measuring range | 0 – 4.0 m |
| Electric power supply | Battery operated, Charging equipment included |
| Normal measuring time | One cylinder liner (4 diameters / 10 levels) 1 hr |
For complete technical specifications, download the product sheet or contact our technical team.
Videos
Accessories & Consumables
-
Cylinder Liners
Piston Ring Expander Unistress / UPRE
For 4-stroke engines with straight-cut piston rings.
-
Cylinder Liners
Wear Edge Milling Machine / VKS
Portable machine for safe removal of wear edges in cylinder liners.
-
Cylinder Liners
Cylinder Liner Honing Machine, pneumatic / HON S
Honing machine for restoration of medium speed engine cylinder liner geometry and surface structure. For workshop and in-situ use.
-
Cylinder Liners
Cylinder Liner Honing Machine, heavy duty / HON 2A
Fully automatic honing machine for restoring 2-stroke cylinder liner geometry and surface structure. Preassembled for short setup time.
Get in touch
Need help choosing the right configuration?
Our technical team can advise on the correct setup for your engine type and operation.
Contact our team