Skip to content

Chris-Marine

Automatic Honing Machine / HON A

Automatic honing machine for restoration of medium speed engine cylinder liner geometry and surface structure.

  • For honing of liners 150–670 mm bore
  • Adjustable stone pressure
  • Removes scuffing marks and restores surface cross pattern
  • Programmable handheld PLC controller
  • Automatic stroke control
  • Ability to specify exact cross pattern angle
  • Cannot go beyond set turning points
  • Speed and stroke length adjusted during operation
  • Electrically driven

Automatic Cylinder Liner Honing Machine

Automatic Honing Machine

HON A is an automatic honing machine that restores engine cylinder liner geometry and surface structure on medium-speed engines.
The electrically driven machine has features like adjustable stone pressure and a programmable handheld PLC controller. The controller includes automatic stroke control functionality and can specify the exact cross pattern angle.

HON A – machine features

  • Automatic stroke control
  • Less noise than when driven with compressed air
  • Exact cross angle pattern
  • Easy setup and start-up of job
  • Exact liner surface cross-pattern angle can be set from the controller
  • Safe to use – cannot go beyond set turning points while running
  • Speed and stroke length can be adjusted during operation
  • Synchronized vertical and rotational movement
  • Adjustable honing stone pressure
  • Can be used with existing Chris-Marine HON S /S2 heads
  • You only need one hoist and one gearbox regardless of the honing head

Automatic honing machine – new features

  • Handheld controller and electrical hoist & drive unit

    Handheld controller for all functions and settings to facilitate honing. Synchronized electric hoist and drive unit combined with automatic stone pressure control increases honing efficiency and enables adjustment during honing.

  • Chain slack detector (optional)

    The patented chain slack detector stops the machine if there is slack in the chain from the hoist. This can occur for instance if the stone pressure is too high, thus preventing the honing head from sliding down in the liner.

  • Vibration dampers

    Chris-Marine has recently introduced vibration dampers in order to minimize head wear, avoid vibration patterns in the cylinder liner and improve productivity.

  • Honing cage (optional)

    The solid honing cage increases safety for the user.

Read more about cylinder reconditioning here

 

 

Technical Specifications

Parameter Value
Electric power supply 3-phase 380/415 V 50/60 Hz
Power requirement 2 kW
Air supply 0.6–0.9 MPa (6–9 bar / 85–130 psi), 2 l/min
Working range 150–670 mm
Surrounding temperature 0–45 °C
Noise level 80 dB(A)
Honing liquid We recommend Chris-Marine Honing Liquid for optimal honing results
Honing heads by working range
Working range Type S, 4 arms Type S2, 8 arms
150–200 mm Type S, 4 armsS15/20 Type S2, 8 arms–
190–230 mm Type S, 4 armsS19/23 Type S2, 8 arms–
210–290 mm Type S, 4 armsS21/29 Type S2, 8 arms–
280–420 mm Type S, 4 armsS28/42 Type S2, 8 arms–
320–500 mm Type S, 4 armsS32/50 Type S2, 8 armsS2 32/50
490–670 mm Type S, 4 arms– Type S2, 8 armsS2 49/67

Electrical note: frequency inverters generate leakage currents. Use an all-current sensitive earth leakage breaker (Type B, 300 mA) to EN 50178 / VDE 0160.

Approved consumables: Chris-Marine honing stones with specified grain and bond, matched to Chris-Marine honing machines.

For complete technical specifications, download the product sheet or contact our technical team.

Videos

Accessories & Consumables

Get in touch

Need help choosing the right configuration?

Our technical team can advise on the correct setup for your engine type and operation.

Contact our team